|
|
ELECTRONIC PRODUCTION EQUIPMENT |
|
| Item Code: ersascope2 |
| ERSASCOPE 2 PLUS, FULL SPECIFICATION UNDER-BGA VIEWING SYSTEM |
| The revolutionary ERSASCOPE 2 Plus is well established as the industry standard equipment for under BGA inspection. Where the original ERSASCOPE can now be considered a general optical inspection system, the ERSASCOPE 2 Plus is a high end system, meeting the needs of the most demanding customers. Setting itself apart from all other BGA optical systems. ... |
| The ERSASCOPE 2 plus with its unique Flip Chip head, is the only system in the world with an aperture height below 50 microns enabling visual inspection under such devices as CSP and Flip Chip. |
| |
| |
| |
| |
| See VIDEOs at the bottom of this page |
| |
|
SEE OTHER RELATED EQUIPMENT BELOW |
|
|
|
|
| The ERSASCOPE 1 plus and ERSASCOPE 2 plus systems are also available as XL version. |
| Use the following link to see the XL version http://www.ersa.com/art-smt-bga-inspection-348-1527.html - Click large image under Ersascope-1 picture below |
| The ERSASCOPE 2 plus Flip Chip head has now lowered the iris to approximately 0.05mm! This means that it is now possible to ?look up? at even the top side of the Flip Chip joint! This critical part of the Flip Chip joint was never before seen by any BGA optical inspection equipment on the market! Additionally, the lower iris now allows for interior joint inspection of low profile CSP and Flip Chip components.Optical innovation following the miniaturization trend! The revolutionary ERSASCOPE 2 plus Flip Chip head boasts the smallest foot print of only 4.0mm x 0.60mm, and can now be used on more densely populated PCBs. Finally, the ERSASCOPE plus System XL allows for the use of either ERSASCOPE 1 plus or ERSASCOPE 2 plus optics for big board applications. With a wide range X-Y micro adjustable antistatic table with integrated bottom side supports, measuring 600x700mm, and a 300 mm telescopic arm, this system has been designed for the comfortable inspection of the largest PCBs. |
|
|
|
|
|
Comes Standard With Three Specially Designed Optical Heads |
|
|
Revolutionary 90 Degree New Flip Chip Head |
|
|
Independently Control The Luminous Energy |
|
|
Xenon Light Source |
|
|
350 X Magnification + Additional 800 digital magnbification via the s/w |
|
|
Flexible light possibilities |
|
|
7 axes of movement in stand and table |
|
|
Powerful Imaging Software Available |
|
|
Original Industry Standard System |
|
|
Lens Rotates To Inspect Smt Devices |
|
|
|
|
|
|
|
|
|
|
|
 |
Registered in England company number 929625.
VAT Registration Number: GB 273677228
Registered office Blundell Production Equipment
Units C/D, Quinn Close, Seven Stars Industrial Estate
Coventry. CV3 4LH
Tel: 02476 210270
Fax: 02476 210280
|
Other Related Equipment - See above associated links
|
|
|
Twin Arm Extraction System Complete (System 250) |
|
|
IR 650 BGA, BGA & SMT Rework System
The brand new IR650/PL650 combines all the advantages of previous models and goes several steps further to remove the word issue from the ?lead-free issue?. With the 650 there are no issues that cannot be resolved, successfully every time with no possibility of damage due to overheating.
The RPC module uses a new high-power (up to 300x enlargement) motor zoom camera, a controllable LED ring lighting system, and an extremely robust, movable stand. The reflow process can be visualized from multiple angles on even the smallest of components. The PL 650 A is the second generation preci-sion placement system designed for the largest range of components (from 1 x 1 mm to 60 x 60 mm in size), more automation, and greater repeatability. A high-resolution camera with motor zoom permits highly precise alignment of component connections to lands with up to 300x enlargement. The excellent image quality is supported by a high-contrast, separately controlled 2 color LED lighting system from four sides. The Auto Pick & Place mode guarantees repeatable and precise (+/- 0.010 mm accuracy) results.
|
 |
|
IR/PL/RPC-550 Rework System
The new IR 550 A plus is the latest product enhancement addition to ERSA?s world renowned and tremendously successful IR 550 A rework system. This third generation update greatly increases the existing performance of the current unit by offering the same technological innovations: DynamicIR, Double True Closed Loop Control with IntelligentIRS and AccuTC temperature measurement, as introduced in our flagship IR 650 A system. Ease of use, rapid rework cycle times, widest variety of rework applications, and lowest operational costs ? these are the well-known user advantages of ERSA?s IR rework systems that can now be afforded to even the most demanding of customers.
Type irplrpc550 into advanced search for more detail
|
 |
|
Twin i-Con Solder Station
Twin High powered solder station with both heated tweezers and 150Watt soldering iron.
Type ic2ac into advanced search for more detail
|
 |
|
IRHP-200 Infra-red Hot Plate
Powerful infrared rework heating plate. Gentle preheating of SMD assemblies and components by means of non-contact IR radiation or contact heat
Type irhp200 into advanced search for more detail
|
 |
|
Double drop Video
|
Ersascope
|
Ersascope XL system
|
Registered in England company number 929625.
VAT Registration Number: GB 273677228
Registered office Blundell Production Equipment
Units C/D, Quinn Close, Seven Stars Industrial Estate
Coventry. CV3 4LH
Tel: 02476 210270
Fax: 02476 210280
|
|
|
